Food plants and warehouses have a responsibility to comply with FDA regulations to ensure that high quality products are being distributed to the public. Recently, the FDA has been particularly concerned about temperature monitoring conditions, and therefore, are issuing citations to facilities for violations. Due to COVID-19, there has been a backlog of inspections in the U.S; in fact, 21,521 inspections remain outstanding out of 23,297, all which must be completed by September. Factories can easily prepare for the audits using a GMP checklist for food industry, which outlines all aspects of their food manufacturing process an auditor will check for.
What is FDA Form 483?
Form 483 is issued to firm management at the end of an inspection. Its purpose is to specify which conditions have violated the Food Drug and Cosmetic (FD&C) Act. Inspectors are trained to assess and identify any conditions or practices that could result in the contamination of food, drug, devices, or cosmetics.
Once the inspection is complete, the auditor will discuss FDA Form 483 with management, who are subsequently responsible for providing a written response addressing how they plan on correcting the violations cited. All observations will be read and discussed to ensure management understands exactly which areas need correction. It’s important to note that FDA Form 483 only includes existing violations, and management is fully responsible for addressing non-cited issues as well as those which have been identified by inspectors.
In addition to FDA Form 483, an Establishment Inspection Report will be submitted to firm management. This outlines all the evidence that was collected during the investigation and the company’s response. After review, the FDA will decide if they need to take additional action. If not, the case will be closed.
What is GMP Compliance
A GMP audit is a set of requirements that ensures food products are produced safely and meet quality standards. A few different areas that can be inspected include water and other raw materials; equipment inspection; and consumer feedback. Additionally, all types of food manufacturers listed below can be subject to inspection:
GMP compliance is not only recommended by the FDA, but by similar international organizations. The benefit of using the GMP checklist for food industry is that it allows food plants to commit to only producing food at the highest standards while increasing operational efficiency. It also covers sanitary and manufacturing practices that can help prepare food plants for HACCP certification.
How Food Plants and Warehouses Can Get Ready for an FDA Audit
There are many steps food plants and warehouses need to take to prepare for an FDA Audit. This usually happens at least once every two years for established companies, and more frequently for newer companies or those who had multiple violations during previous audits. Poor preparation can result in penalties and other severe consequences, so management should make sure to follow all requirements prior to the inspection. Below is the procedure auditors will take when visiting manufacturers.
The GMP Checklist for Food Industry
GMP Audits are organized into different systems that represent the different stages of a factory’s operations, where an auditor will check different GMP requirements. For maximum efficiency, a company should use the GMP checklist for food industry.
1. Equipment and utensilsManagement is responsible for employing and training enough personnel to manufacture, process, and package products. They must have strict rules against allowing anyone displaying symptoms of illness near the manufacturing facilities.
Factories should have an established production and process control procedures to meet quality standards. Management is advised to make sure raw materials are stored properly and that rejected materials are prevented from being used in manufacturing in the future.
The FDA wants to be sure that a factory can process and package goods safely and efficiently. This is why GMP compliance doesn’t come into effect when production begins; it starts during the construction stages. It’s also important for firm management to remember that maintaining the exterior of the factory is just as important as doing so for the interior. This is because the quality of the land and air around the factory can potentially lead to infestation or contamination.
A few other action items for factory management to consider in order to pass the FDA’s audit are as follows:
Responsibly storing products is just as important as handling them. Manufacturing plants can easily fail the audit if their storage facilities do not meet the compliance standards as per this GMP checklist for food industry. For instance, the quality control unit should ensure that the products are quarantined prior to release and that they are stored in regulated conditions. This means the temperature and light are appropriate for that particular product.
Management should also make sure that they have all distribution records available for the audit.
The GMP compliance inspector will request to see various documentation proving that the facility is following all manufacturing standards. Management must have these documents readily available and be able to answer the inspector’s questions. Examples include quality manuals, production schedules, and logbooks.
Management should also train their employees on data security. This means refraining from sharing passwords, restricting access for certain functions, and keeping electronic records secure.
During the audit, management might be asked how products are tracked and if they are easily identifiable. To prevent issues in this area, staff should be diligent about the way they handle materials and to follow the instructions received during training.
How an loT Solution Can Help
Running a food manufacturing and packaging facility is a complex business due to the safety and quality standards management is required to meet. This can be difficult to do so manually, which is where IoT solutions come in. They were created to help streamline an organization’s operations by integrating different technologies together. The sensors in IoT solutions allow appliances to connect, so employees can rely on getting accurate data in real time. This includes temperature and lighting control, which are crucial factors in maintaining a safe environment for food manufacturing, packaging, and storage.
Complying with FDA regulations is extremely important for food plants and warehouses. Manufacturers and factories are encouraged to use the GMP checklist for food industry to prepare for their audit and consider using IoT solutions to increase productivity amongst personnel and management.
Have further questions about IoT solutions and food manufacturing? Please contact the experts at Dickson.